![]() ![]() The SSP 200 also offers the option to use an external source for test signals, which can then be directed to any speaker, or all speakers in sequence. The pink noise test signals can be used to calibrate a speaker’s interaction with the acoustical environment. An individual trim level is provided for each channel to facilitate calibration. ![]() ![]() Dolby noise is a band‑limited pink noise that allows for higher sound pressure levels, which is advantageous when calibrating speaker outputs to equal SPLs. The SSP 200 generates test signals, including Dolby noise and full‑bandwidth pink noise, that can be routed sequentially to each speaker, or directed selectively to any speaker using the software. Rear surround speakers on the back wall just about ear level. The projector will hang at 3m from the screen. Surround speakers on the side walls at 4.5m. They will be right at the edge near the side walls. A nine-band parametric EQ is available for each of the speaker channels to tailor the output signal to the acoustical environment. 4 ceiling speakers which will be placed at a distance of 3.5m and 5.75m from the screen. Using the software, an integrator can specify the number and size of speakers in the system, and enter the distance of each speaker from the central listening position, or location where acoustical measurements are taken. Control and ConfigurationĮxtron PCS - Product Configuration Software includes an intuitive user interface for efficient setup and control of the SSP 200 as well as calibration of the sound system. The SSP 200 is designed for simple, intuitive operation from the front panel, with LED indicators for source selection, source format detection, listening mode, and output volume level. Front panel controls can be locked out to prevent unauthorized operation. For compatibility with pro AV audio equipment, the SSP 200 offers balanced or unbalanced inputs and outputs and an EXP output expansion port for connection to a DMP Plus Series audio DSP processor. It can be controlled and configured using RS-232 serial control or via a network connection. The SSP 200 is housed in a 1U, half rack width enclosure that is rack-mountable and occupies a fraction of the space required by a consumer surround processor or AV receiver. It is designed for integration into pro A/V installations, featuring a compact, half rack metal enclosure, RS‑232 serial & LAN control, and balanced line level outputs. The SSP 200 features an HDMI input with loop through, coaxial and optical digital inputs, and an analog stereo input. An upmix function synthesizes exceptional multichannel audio from stereo content. Providing up to ten built-in outputs, plus additional outputs via an EXP port, the SSP 200 provides the flexibility needed for multimedia system requirements, including support for the latest immersive formats of Dolby Atmos and DTS:X. The Extron SSP 200 is a high-performance Surround Sound Processor designed for pro AV applications in corporate and commercial environments that automatically decodes Dolby® and DTS® formats from HDMI sources to discrete audio outputs. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |